BEPeterson Supplies Godfrey & Wing a Batch System Vacuum Chamber

October 13, 2015 - "Press Releases"

BEPeterson, Inc. has supplied a batch system vacuum chamber to Godfrey & Wing. Godfrey & Wing has 65 years of experience and is recognized as the worldwide authority in vacuum impregnation. Godfrey & Wing designs and manufactures a complete line of innovative vacuum impregnation equipment and sealants. Vacuum impregnation as an industrial process has been in commercial use for more than 60 years. For the world's largest manufacturers, it continues to be the preferred process through which to guarantee the pressure-proof, leak-proof, and corrosion-proof requirements of parts and components in critical operations.

BEPeterson Vacuum ChamberBEPeterson Vacuum Chamber Manufacturer 

Vacuum Chamber Specifications: 60" OD x 72" Shell Length
Design Temp @ 150° F - Full Vacuum 5 torr / min - Material SA-516-70
MAWP 175 psi @ 350° F - Vessel Capacity - 1080 gallons
 
Daniel Szczurko, VP Business Development at BEPeterson states, “The unique feature of this vacuum chamber was the requirement for a quick opening hydraulic closure. The lifting mechanism was designed to lift the 1000 lb. cover to a full 90° open position”. See a video of the BEPeterson vacuum chamber quick opening closure at https://www.youtube.com/watch?v=iVhjApny9dQ
 
The vessel required a 5 torr or better leak rate. The test procedure isolated the vessel from the vacuum pump with a ball valve with the pump turned off. A gauge was monitored and recorded vacuum for ten minutes. The vacuum loss, based on the vessel size and empty state, after ten minutes was fewer than 2.5%.
 
Brad Welch, COO of Godfrey & Wing states “the vessel for this 60” system was among the largest we’ve incorporated into a line. We’d not worked with BE Peterson before and were surprised at that fact once we visited and saw their capabilities. Our Engineering teams worked well together to define the project requirements and make the inevitable adjustments required during execution. The system is installed in a large automotive tier one in Mexico and performing to the demanding vacuum levels our process employs.”
 

 

 

 

Move to Top