Brush Research Manufacturing (BRM) announces article and video about NamPower diamond abrasive wheel brushes in time for HOUSTEX 2015 tradeshow. Visit BRM in Booth #242 to learn more about how NamPower diamond abrasive wheels are used to edge radius, polish, deburr, and surface finish harder materials.
Los Angeles, CA (PRWEB) February 24, 2015
Brush Research Manufacturing (BRM), global supplier of Flex-Hone® tools and industrial brushes, is announcing an article and video about NamPower diamond abrasive wheels for finishing harder materials such as diamond, ceramic, cubic boron nitride (CBN), and glass. To see these brushing tools, visit BRM at HOUSTEX from February 24 to 26 at the George R. Brown Convention Center in Houston.
BRM’s NamPower technology is a family of high-performance nylon abrasive brushes for outer diameter (OD) surface finishing. Manufacturers and machine shops use NamPower composite hub wheels as an alternative to wire wheels and non-woven abrasive brushes. With their diamond-impregnated nylon abrasive filmanents, NamPower wheel brushes put more cutting points at the point of the attack.
Applications and Specifications
As BRM’s article explains, NamPower diamond abrasive wheel brushes produce the ideal edge radius on hard materials such as carbide, CBN, ceramic, diamond, glass, and hardened tool steels. These diamond wheels also extend the benefits of BRM’s NamPower technology to plasma-sprayed and nitride-coated surfaces, and are great for polishing flute reliefs and carbide inserts.
NamPower diamond abrasive wheel brushes are supplied in three diameters: 100 mm (4 inches), 150 mm (6 inches), and 200 mm (8 inches). The 150 mm and 200 mm diameter cutting tools have face widths of either 10 mm or 15 mm. The 100 mm diamond wheel is available with either a 5 mm or 10 mm face width. All of these diamond abrasive brushing tools come standard in 600 mesh.
Visit BRM at HOUSTEX 2015 (Booth 242)
From February 24 to 26, BRM’s technical team will be at HOUSTEX 2015 to answer questions about NamPower technology, Flex-Hone® tools, and the American-owned manufacturer’s full line of industrial brushes. Manufacturers, metalworkers, machine shops, and industrial distributors are invited to visit BRM in Booth 242 at the George R. Brown Convention Center in Houston, Texas.
About Brush Research Manufacturing
Brush Research Manufacturing (BRM), makers of flexible honing tools and a full line of industrial brushes, is located in Los Angeles, California. For over 55 years, BRM has been solving surface finishing challenges with brushing technology. BRM’s Flex-Hone® tool is the industry standard against which all other ID surface finishing solutions are compared. Choose NamPower for OD applications.
Vice President of Marketing
Brush Research Manufacturing Co. Inc.
4642 Floral Drive
Los Angeles, CA 90022
Ph: (323) 261-2193